• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

RapidRestore24

404-445-4561
  • Home
  • About
  • Services
    • Water Damage Remediation
    • Fire and Smoke Damage Remediation
    • Mold Remediation
    • Fire Damage Repair
    • Burst Pipe Water Damage
    • Sewage Backup Cleanup
    • Storm and Flood Damage
  • Service Areas
  • Gallery
  • Contact Us

Burst Pipe Water Damage Cleanup

Burst pipe water damage spreads fast through ceilings, walls and floors. RapidRestore24 cleans up burst pipe water damage across Marietta and metro Atlanta, and we answer our phone 24/7.

Burst pipe water damage in a ceiling

Water or fire damage right now?

Call us. Our phone is answered 24/7, and we will tell you what to do first to limit the damage.

Call (404) 445-4561

A burst pipe can release hundreds of gallons of water in an hour. A slow leak inside a wall can do as much damage over a few weeks. RapidRestore24 extracts the water, dries the structure and repairs the damage after burst pipes, leaking supply lines and failed fittings, across metro Atlanta.

First, stop the water

  • Find your main shut-off valve and turn it off. In many Atlanta-area homes it is in the basement, crawl space, garage or near the water heater. Some are at the meter by the street.
  • Open a faucet on the lowest floor to drain the pressure.
  • If water is near outlets, appliances or the electrical panel, turn off power to that area only if you can do it safely.
  • Take photos of the leak and the damage before cleanup.

You will need a plumber to fix the pipe itself. We take care of everything the water damaged.

Why burst pipes cause more damage than it looks

Water from a pipe is under pressure and spreads fast. It runs under flooring, down inside walls and into the floor below. Drywall and insulation hold water, and subfloors trap it. If those materials are not dried properly, you get swelling, delamination and mold weeks later. That is why we measure moisture instead of judging by what looks dry.

How we handle a burst pipe

Extraction. Standing water is removed from floors, carpet and pad.

Moisture mapping. Moisture meters and thermal imaging show where the water went, including inside walls and ceilings below.

Controlled demolition. Only what cannot be dried in place, such as soaked drywall at the bottom of a wall or saturated pad, is removed.

Structural drying. Air movers and dehumidifiers run until readings confirm the structure is dry.

Repairs. Drywall, paint, trim and flooring are put back so the room is finished.

Frozen pipes

Metro Atlanta does not get long freezes, which is exactly why pipes are often not protected. During a hard freeze, pipes in exterior walls, attics, crawl spaces and garages are most at risk. The leak often shows up when the pipe thaws. Keep cabinet doors open on exterior walls and let a faucet drip during a freeze.

Insurance

Sudden pipe bursts are often covered by homeowners insurance, while long-term leaks may not be. We document the damage and the drying with photos and readings to support your claim. See also our main water damage restoration page.

Areas we serve

We handle burst pipe and leak cleanup within about 30 miles of our Marietta base, across Cobb, Fulton, DeKalb and Cherokee counties and the nearer parts of Douglas, Paulding and Gwinnett:

  • Marietta
  • Smyrna
  • Kennesaw
  • Acworth
  • Vinings
  • Sandy Springs
  • Roswell
  • Dunwoody
  • Brookhaven
  • Decatur

Not listed? See all service areas or call 404-445-4561.

Call 404-445-4561

If a pipe has burst or you have found a leak, call us now. Our phone is answered 24 hours a day, 7 days a week. So you can reach a person the moment it happens. Prefer to write? Use our contact form.

Limiting burst pipe water damage before we arrive

Shut off the main water valve and, if water is near outlets, the power to that area. Cobb County Water System customers can find leak and service information on the county site (Cobb County Water System). After the pipe is fixed, burst pipe water damage needs full drying, as described on our water damage remediation page and our drying timeline. Wet areas left too long can need mold remediation.

Related articles

  • What to Throw Away After a Burst Pipe: A ChecklistAfter a burst supply line, porous materials that stayed wet are usually discarded, while solid wood, metal, glass and sealed surfaces can…
  • Burst Pipe Water Damage: What to Do in the First HourA burst pipe gives you very little time to think. Here is the order to work in: stop the water, make the…
  • Mold After a Leak: What to Do in the First 48 HoursMold after a leak is common, and it can start within 24 to 48 hours. Here is what to do in that…

Need help with water, fire or mold damage?

Call RapidRestore24. Our phone is answered 24/7.

Call (404) 445-4561

Primary Sidebar

Our Services:

  • Water Damage Remediation
  • Fire and Smoke Damage Remediation
  • Mold Remediation
  • Fire Damage Repair
  • Water Damage Atlanta
  • Burst Pipe Water Damage
  • Sewage Backup Cleanup
  • Storm and Flood Damage

Let’s Work Together

Contact us today to see what we can do for you.

REQUEST A QUOTE

Footer

Contact Us

RapidRestore24
404-445-4561

We are available 24/7 – Monday through Sunday.

We are also open 24/7 for Water Damage Calls.

Services

  • Water Damage Remediation
  • Fire and Smoke Damage Remediation
  • Mold Remediation
  • Fire Damage Repair
  • Water Damage Atlanta
  • Burst Pipe Water Damage
  • Sewage Backup Cleanup
  • Storm and Flood Damage

Information

  • Privacy Policy
  • Disclaimer
  • Terms and Conditions
  • Refer a Friend & Earn Cash
Appointments by Request

© 2026 · RapidRestore24.com - All Rights Are Reserved